Attachment devices and attachment points

PFEIFER offers an extensive range of attachment points, shackles, chain slings, textile attachment devices, wire rope slings, edge and abrasion protection systems as well as special solutions. The right choice is decisive for the safe and efficient attachment of loads, because attachm READ MORE
PFEIFER offers an extensive range of attachment points, shackles, chain slings, textile attachment devices, wire rope slings, edge and abrasion protection systems as well as special solutions. The right choice is decisive for the safe and efficient attachment of loads, because attachment devices and attachment points are the connection between the load and the load carrier, such as the crane hook. Therefore, we not only offer you the right product, but also the technical support for a safe attachment procedure. PFEIFER is also your partner for an ideal solution in case of special attachment problems. READ LESS

Attachment points from PFEIFER enable the secure attachment or lashing of a...

In comparison with other attachment devices, chain slings from PFEIFER have...

PFEIFER DIN chains conforming to DIN 766, DIN 763 and 5685 are used in a wide...

Edge protection systems from PFEIFER offer ideal protection for your...

Shackles from PFEIFER are used when attachment devices or ropes have to be...

Polytex® textile attachment devices from PFEIFER are light and flexible with...

Turnbuckles are used to connect two rope end terminations together. The...

Wire rope slings from PFEIFER conforming to EN 13414 offer a wide range of...

Specification

  • Quality grade:
    • 10
  • Operating temperature:
    • –40 °C to +200 °C = 100 % working load limit; +200 °C to +300 °C = 90 % working load limit; +300 °C to +380 °C = 60 % working load limit
  • Standard:
    • on the basis of DIN EN 1677
  • Certification:
    • H-stamp
  • Identification mark:
    • Batch number
  • Safety factor:
    • 4
  • Surface:
    • powder-coated
  • Colour:
    • orange

Specification

  • Quality grade:
    • 10
  • Legs Quantity:
    • 4-leg
  • Operating temperature:
    • –40 °C to +200 °C = 100 % working load limit; below –40 °C = use not permitted; above +200 °C = use not permitted
  • Standard:
    • EN 1677-compliant chain components
    • Chain following EN 818
  • Identification mark:
    • "Quality grade no. ""10"" (every 300 mm on the chain)"
    • Quality grade and working load limit symbol
  • Marking:
    • Batch number and serial number
  • Safety factor:
    • 4
  • Chain surface:
    • coated
  • Chain colour:
    • blue
  • Component surface:
    • coated
  • Component colour:
    • blue
  • Shortening:
    • can be shortened

Specification

  • Quality grade:
    • 12
  • Operating temperature:
    • –60 °C to +200 °C = 100 % working load limit; +200 °C to +300 °C = 60 % working load limit
  • Standard:
    • Based on DIN EN 818
  • Certification:
    • D-stamp
  • Identification mark:
    • Batch number
    • Quality grade no.
  • Safety factor:
    • 4
  • Surface:
    • cathodic dip-paint coating
  • Colour:
    • black

Specification

  • Quality grade:
    • 8
  • Operating temperature:
    • –40 °C to +200 °C
  • Standard:
    • EN 1677-1
  • Identification mark:
    • Batch number
  • Attachment:
    • screw-on
  • Safety factor:
    • 4
  • Rotation:
    • rigid
  • Tilting:
    • 180°
  • Load angle:
    • ± 45°
  • Range of application Attachment devices:
    • Attachment technology
  • Type of attachment:
    • 1-leg

Specification

  • Quality grade:
    • 10
  • Legs Quantity:
    • 2-leg
  • Operating temperature:
    • –40 °C to +200 °C = 100 % working load limit; below –40 °C = use not permitted; above +200 °C = use not permitted
  • Standard:
    • Chain following EN 818
    • EN 1677-compliant chain components
  • Identification mark:
    • "Quality grade no. ""10"" (every 300 mm on the chain)"
    • Quality grade and working load limit symbol
  • Marking:
    • Batch number and serial number
  • Safety factor:
    • 4
  • Chain surface:
    • coated
  • Chain colour:
    • blue
  • Component surface:
    • coated
  • Component colour:
    • blue
  • Shortening:
    • can be shortened

Specification

  • Operating temperature:
    • –40 °C to +100 °C
  • Standard:
    • DIN 60005
  • Safety factor:
    • 5
  • Material:
    • polyester
  • Technical note:
    • The straps are integrated into the load-bearing frame of the prefabricated element during manufacture, taking into account the rules of rigging technology.

Specification

  • Quality grade:
    • 8
  • Operating temperature:
    • –40 °C to +200 °C
  • Safety factor:
    • 5
  • Material:
    • Alloyed steel (quality grade 8)
  • Shape:
    • curved
  • Stirrup surface:
    • coated (7 t - 55 t hot-dip galvanised version)
  • Bolt surface:
    • coated (shackle 7 t - 55 t hot-dip galvanised)
  • Bolt type:
    • Safety bolt, nut and split pin

Specification

  • Quality grade:
    • 10
  • Legs Quantity:
    • single-leg
  • Operating temperature:
    • –40 °C to +200 °C = 100 % working load limit; below –40 °C = use not permitted; above +200 °C = use not permitted
  • Standard:
    • Chain following EN 818
    • EN 1677-compliant chain components
  • Marking:
    • "Quality grade no. ""10"" (every 300 mm on the chain)"
    • Batch number and serial number
  • Identification mark:
    • Quality grade and working load limit symbol
    • Quality grade and working load limit symbol
  • Safety factor:
    • 4
  • Chain surface:
    • coated
  • Chain colour:
    • blue
  • Component surface:
    • coated
  • Component colour:
    • blue
  • Shortening:
    • cannot be shortened

Specification

  • Quality grade:
    • 10
  • Legs Quantity:
    • 4-leg
  • Operating temperature:
    • –40 °C to +200 °C = 100 % working load limit; below –40 °C = use not permitted; above +200 °C = use not permitted
  • Standard:
    • Chain following EN 818
    • EN 1677-compliant chain components
  • Identification mark:
    • Quality grade and working load limit symbol
    • "Quality grade no. ""10"" (every 300 mm on the chain)"
  • Marking:
    • Batch number and serial number
  • Safety factor:
    • 4
  • Chain surface:
    • coated
  • Chain colour:
    • blue
  • Component surface:
    • coated
  • Component colour:
    • blue
  • Shortening:
    • cannot be shortened

* plus shipping

nach oben

Contact Newsletter Returns