Hoists and winches

Lifting devices and winches are used for lifting and moving loads both vertically and horizontally. PFEIFER offer a large selection of suitable products in further areas of application, with which almost all lifting and movement procedures can be covered. From hoists such as hand or e READ MORE
Lifting devices and winches are used for lifting and moving loads both vertically and horizontally. PFEIFER offer a large selection of suitable products in further areas of application, with which almost all lifting and movement procedures can be covered. From hoists such as hand or electric chain hoists, winches and rope hoists, weighing devices, transport device and tool hydraulics, the PFEIFER product range covers everything. We also assist you with technical questions around your application and with the configuration of individual special solutions. READ LESS

"Lifting devices from PFEIFER are suitable for ""lifting from above"" and...

Permanent load lifting magnets from PFEIFER enable the simple and safe...

Tension dynamometers and crane scales from PFEIFER are the best choice when...

Transport devices from PFEIFER are intended for the in-plant transport of...

PFEIFER offers various winches, rope hoists and pulleys for your application.

Specification

  • Socket body Surface:
    • galvanized
  • Fastening:
    • Wall or bracket mounting depending on the execution

Specification

  • Type:
    • Permanent load-lifting magnet
  • Standard:
    • DIN EN 13155
  • Safety factor:
    • 3.5
  • Operating temperature:
    • –10 °C to +80 °C
  • Magnet surface Coating:
    • nickel-plated
  • Control lever:
    • backlash-free
    • self-braking
  • Suspension:
    • Suspension Ring
  • Range of application Magnets:
    • Transport
    • Rotate
    • move
  • load types Magnets:
    • Standard

Specification

  • Standard:
    • EN 13157
  • Safety factor:
    • 4
  • Socket body material:
    • Aluminum
  • Overload protection:
    • Shear pins
  • Rope hoist rope:
    • Rope length unlimited

Specification

  • Shaft Surface:
    • galvanized
  • Rolls Material:
    • Polyurethane
  • Load contact surface Material:
    • Rubber (abrasion-resistant)
  • Suspension:
    • Rigid attachment eye (from 12 t)

Specification

  • Operating temperature:
    • –20 °C to +40 °C
  • Power supply:
    • Without mains cable
  • Overheating protection:
    • Temperature monitor for lifting motor
  • Control line:
    • Length corresponds to the chain length
  • Impact protector:
    • Limit position switch-off for limiting the highest and lowest load position
  • Operating voltage:
    • 400 V, 3 ph, 50 Hz
  • Insulation class:
    • F
  • Overload protection:
    • Friction coupling
  • Chain stores:
    • including
  • Protection class:
    • IP 55
  • Lifting method:
    • Main and fine stroke
  • Controller:
    • Contactor control 24V AC

Specification

  • Operating temperature:
    • –20 °C to +40 °C
  • Power supply:
    • Without mains cable
  • Overheating protection:
    • Temperature monitor for lifting motor
  • Control line:
    • Length corresponds to the chain length
  • Impact protector:
    • Limit position switch-off for limiting the highest and lowest load position
  • Operating voltage:
    • 400 V, 3 ph, 50 Hz
  • Insulation class:
    • F
  • Overload protection:
    • Friction coupling
  • Chain stores:
    • including
  • Protection class:
    • IP 55
  • Lifting method:
    • Main and fine stroke
  • Controller:
    • Contactor control 24V AC

Specification

  • Operating temperature:
    • –20 °C to +40 °C
  • Overheating protection:
    • Temperature monitor for lifting motor
  • Control line:
    • Length corresponds to the chain length
  • Impact protector:
    • Limit position switch-off for limiting the highest and lowest load position
  • Operating voltage:
    • 400 V, 3 ph, 50 Hz
  • Insulation class:
    • F
  • Overload protection:
    • Friction coupling
  • Chain stores:
    • including
  • Protection class:
    • IP 55
  • Lifting method:
    • Main and fine stroke
  • Controller:
    • Contactor control 24V AC

Specification

  • Operating temperature:
    • –20 °C to +40 °C
  • Power supply:
    • Without mains cable
  • Overheating protection:
    • Temperature monitor for lifting motor
  • Control line:
    • Length corresponds to the chain length
  • Impact protector:
    • Limit position switch-off for limiting the highest and lowest load position
  • Operating voltage:
    • 400 V, 3 ph, 50 Hz
  • Insulation class:
    • F
  • Overload protection:
    • Friction coupling
  • Chain stores:
    • including
  • Protection class:
    • IP 55
  • Lifting method:
    • Main and fine stroke
  • Controller:
    • Contactor control 24V AC

Specification

  • Safety factor:
    • 2 (designated permissible tensile force)
  • Socket body material:
    • Sheet steel
  • Rolls Material:
    • Steel (galvanized and with ball bearings)
  • Suspension:
    • hook suspension gear

Specification

  • Safety factor:
    • 2 (designated permissible tensile force)
  • Socket body material:
    • Sheet steel
  • Rolls Material:
    • Steel (galvanized and with ball bearings)

* plus shipping

nach oben

Contact Newsletter Returns