Hoists and winches

Lifting devices and winches are used for lifting and moving loads both vertically and horizontally. PFEIFER offer a large selection of suitable products in further areas of application, with which almost all lifting and movement procedures can be covered. From hoists such as hand or e READ MORE
Lifting devices and winches are used for lifting and moving loads both vertically and horizontally. PFEIFER offer a large selection of suitable products in further areas of application, with which almost all lifting and movement procedures can be covered. From hoists such as hand or electric chain hoists, winches and rope hoists, weighing devices, transport device and tool hydraulics, the PFEIFER product range covers everything. We also assist you with technical questions around your application and with the configuration of individual special solutions. READ LESS
Hoists

"Lifting devices from PFEIFER are suitable for ""lifting from above"" and...

Hoists
Load lifting magnets

Permanent load lifting magnets from PFEIFER enable the simple and safe...

Load lifting magnets
Scales

Tension dynamometers and crane scales from PFEIFER are the best choice when...

Scales
Transport devices

Transport devices from PFEIFER are intended for the in-plant transport of...

Transport devices
Winches and rope hoists

PFEIFER offers various winches, rope hoists and pulleys for your application.

Winches and rope hoists
Crane scales Multi
Crane scales Multi

Specification

  • Operating temperature:
    • –10 °C to +40 °C
  • Protection class:
    • IP40
  • Battery type:
    • 4 x AA
  • Battery lifetime (continuous operation):
    • 40
  • Version Weighing devices:
    • Crane scales
  • Display:
    • on the measuring device
Please login to see prices
More information
TU grip hoist-rope hoist
TU grip hoist-rope hoist

Specification

  • Standard:
    • EN 13157
  • Safety factor:
    • 4
  • Socket body material:
    • Aluminum
  • Overload protection:
    • Shear pins
  • Rope hoist rope:
    • Rope length unlimited
Please login to see prices
More information
Inox Star stainless steel pulley block
Inox Star stainless steel pulley block

Specification

  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Safety factor:
    • 4
  • Operating temperature:
    • –20 °C to +40 °C
  • Socket body material:
    • Stainless steel
Please login to see prices
More information
Transport trolley set
Transport trolley set

Specification

  • Shaft Surface:
    • galvanized
  • Rolls Material:
    • Polyurethane
  • Load contact surface Material:
    • Rubber (abrasion-resistant)
  • Suspension:
    • Rigid attachment eye (from 12 t)
Please login to see prices
More information
Lever hoist AL
Lever hoist AL

Specification

  • Standard:
    • Hoist: EN 13157
    • Chain: EN 818-7
  • Safety factor:
    • 4
  • Operating temperature:
    • –10 °C to +50 °C
    • reduced working load limits outside this range - before use at ambient temperatures < 0 °C, check if the brake is iced up by lifting and lowering a small load 2 - 3 times
  • Socket body material:
    • Aluminum
  • Suitability for application:
    • Attachment technology
Please login to see prices
More information
Rope pulley
Rope pulley

Specification

  • Safety factor:
    • 2 (designated permissible tensile force)
  • Socket body material:
    • Sheet steel
  • Rolls Material:
    • Steel (galvanized and with ball bearings)
Please login to see prices
More information
Roller running gear Ecodur
Roller running gear Ecodur

Specification

  • Version:
    • Roller running gear
Please login to see prices
More information
LB lever hoist
LB lever hoist

Specification

  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Safety factor:
    • 4
  • Operating temperature:
    • –40 °C to +60 °C
  • Socket body material:
    • Powder-coated sheet steel
  • Suitability for application:
    • Attachment technology
    • Cargo lashing equipment
Please login to see prices
More information
Rope pulley, can be opened
Rope pulley, can be opened

Specification

  • Safety factor:
    • 2 (designated permissible tensile force)
  • Socket body material:
    • Sheet steel
  • Rolls Material:
    • Steel (galvanized and with ball bearings)
  • Suspension:
    • hook suspension gear
Please login to see prices
More information
MINIOFOR continuous winch
MINIOFOR continuous winch

Specification

  • Technical note:
    • Increase in the carrying capacity possible through reeving by means of pulley block principle (2 x 100 kg or 2 x 300 kg and 1.9 x 300 kg).
Please login to see prices
More information
Radio remote control for Star-Speedline electric chain hoist
Radio remote control for Star-Speedline electric chain hoist

Specification

  • Battery lifetime (continuous operation):
    • 30
  • Protection class:
    • IP 65
Please login to see prices
More information
HIT hydraulic jack
HIT hydraulic jack

Specification

  • Standard:
    • DIN EN 1494
  • Drive type:
    • hydraulic
Please login to see prices
More information
PC-HHP wired remote read-out device
PC-HHP wired remote read-out device

Specification

  • Battery type:
    • 9V block battery
  • Battery lifetime (continuous operation):
    • 80
  • Version Weighing devices:
    • Remote reading device
Please login to see prices
More information
Rope pulley
Rope pulley

Specification

  • Safety factor:
    • 2 (designated permissible tensile force)
  • Socket body material:
    • Sheet steel
  • Rolls Material:
    • Steel (galvanized and with ball bearings)
  • Suspension:
    • bolt suspension
Please login to see prices
More information
HIT steel winch Type 100
HIT steel winch Type 100

Specification

  • Standard:
    • DIN 7355
  • Drive type:
    • Rack and pinion winch
  • Technical note:
    • Fold-out drive crank, foot claw not adjustable, housing not rotatable.
Please login to see prices
More information
Roller running gear
Roller running gear

Specification

  • Version:
    • Roller running gear
Please login to see prices
More information
PFEIFER rope hoist - standard
PFEIFER rope hoist - standard

Specification

  • Standard:
    • EN 13157
  • Safety factor:
    • 4
  • Socket body material:
    • Aluminum
  • Overload protection:
    • Shear pins
  • Rope hoist rope:
    • Rope length unlimited
Please login to see prices
More information
RHINO lever hoist
RHINO lever hoist

Specification

  • Standard:
    • Hoist: EN 13157
    • Chain: EN 818-7
  • Safety factor:
    • 4
  • Operating temperature:
    • reduced carrying capacities outside this range
    • –10 °C to +50 °C
  • Socket body material:
    • Powder-coated sheet steel
  • Suitability for application:
    • Attachment technology
    • Cargo lashing equipment
Please login to see prices
More information
RHINO pulley block
RHINO pulley block

Specification

  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Safety factor:
    • 4
  • Operating temperature:
    • –25 °C to +40 °C
  • Chain surface:
    • galvanized
  • Socket body material:
    • Sheet steel
Please login to see prices
More information
Pulley block 360° with rotating hand chain
Pulley block 360° with rotating hand chain

Specification

  • Standard:
    • Hoist: EN 13157
    • Chain: EN 818-7
  • Safety factor:
    • 4
  • Operating temperature:
    • –25 °C to +50 °C
  • Chain surface:
    • galvanised and chromated yellow
  • Socket body material:
    • Powder-coated sheet steel
Please login to see prices
More information
HIT steel winch Type 200
HIT steel winch Type 200

Specification

  • Standard:
    • DIN 7355
  • Drive type:
    • Rack and pinion winch
  • Technical note:
    • Fold-out drive crank, foot claw not adjustable, housing not rotatable.
Please login to see prices
More information
Reel chassis
Reel chassis

Specification

  • Version:
    • Reel chassis
Please login to see prices
More information
Lever hoist ERGO 360
Lever hoist ERGO 360

Specification

  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Safety factor:
    • 4
  • Operating temperature:
    • –10 °C to +50 °C
  • Socket body material:
    • Aluminum
  • Suitability for application:
    • Cargo lashing equipment
    • Attachment technology
Please login to see prices
More information
Wall mounted rope winch
Wall mounted rope winch

Specification

  • Socket body Surface:
    • galvanized
  • Fastening:
    • Wall or bracket mounting depending on the execution
Please login to see prices
More information
Beam clamp
Beam clamp

Specification

  • Version:
    • Beam clamp
Please login to see prices
More information
Pulley block 360° with space-saving roller running gear
Pulley block 360° with space-saving roller running gear

Specification

  • Standard:
    • EN 13157
  • Safety factor:
    • 4
  • Operating temperature:
    • –25 °C to +50 °C
  • Chain surface:
    • galvanised and chromated yellow
  • Socket body material:
    • Powder-coated sheet steel
Please login to see prices
More information
HIT steel winch Type 300
HIT steel winch Type 300

Specification

  • Standard:
    • DIN 7355
  • Drive type:
    • Rack and pinion winch
  • Technical note:
    • Fold-out drive crank, foot claw adjustable, housing not rotatable.
Please login to see prices
More information
Aluminium rope pulley
Aluminium rope pulley

Specification

  • Safety factor:
    • 2 (designated permissible tensile force)
  • Socket body material:
    • Aluminum
  • Rolls Material:
    • Polyamide
  • Suspension:
    • bolt suspension
Please login to see prices
More information
Lever hoist P85
Lever hoist P85

Specification

  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Safety factor:
    • 4
  • Operating temperature:
    • reduced working load limits outside this range - before use at ambient temperatures < 0 °C, check if the brake is iced up by lifting and lowering a small load 2 - 3 times
    • –10 °C to +50 °C
  • Socket body material:
    • Malleable iron
  • Suitability for application:
    • Attachment technology
    • Cargo lashing equipment
Please login to see prices
More information
Star-Speedline electric chain hoist with eye suspension
Star-Speedline electric chain hoist with eye suspension

Specification

  • Operating temperature:
    • –20 °C to +40 °C
  • Overheating protection:
    • Temperature monitor for lifting motor
  • Control line:
    • Length corresponds to the chain length
  • Impact protector:
    • Limit position switch-off for limiting the highest and lowest load position
  • Operating voltage:
    • 400 V, 3 ph, 50 Hz
  • Insulation class:
    • F
  • Overload protection:
    • Friction coupling
  • Chain stores:
    • including
  • Protection class:
    • IP 55
  • Lifting method:
    • Main and fine stroke
  • Controller:
    • Contactor control 24V AC
Please login to see prices
More information
Permanent load-lifting magnet S
Permanent load-lifting magnet S

Specification

  • Type:
    • Permanent load-lifting magnet
  • Standard:
    • DIN EN 13155
  • Safety factor:
    • 3.5
  • Operating temperature:
    • –10 °C to +80 °C
  • Magnet surface Coating:
    • nickel-plated
  • Control lever:
    • backlash-free
    • self-braking
  • Suspension:
    • Rigid attachment eye
  • Range of application Magnets:
    • Transport
  • load types Magnets:
    • Standard
Please login to see prices
More information
Permanent load-lifting magnet R
Permanent load-lifting magnet R

Specification

  • Type:
    • Permanent load-lifting magnet
  • Standard:
    • DIN EN 13155
  • Safety factor:
    • 3.5
  • Operating temperature:
    • –10 °C to +80 °C
  • Magnet surface Coating:
    • nickel-plated
  • Control lever:
    • backlash-free
    • self-braking
  • Suspension:
    • Rigid attachment eye
  • Range of application Magnets:
    • Transport
  • load types Magnets:
    • Round material
Please login to see prices
More information
Dynamometer Radiolink Plus
Dynamometer Radiolink Plus

Specification

  • Operating temperature:
    • –10 °C to +50 °C
  • Protection class:
    • IP67
  • Battery type:
    • Standard AA battery
  • Battery lifetime (continuous operation):
    • 1200
  • Version Weighing devices:
    • Dynamometer
  • Certification:
    • Calibration certificate included
  • Display:
    • Remotely readable by wireless
Please login to see prices
More information
Star-Speedline electric chain hoist with hook suspension
Star-Speedline electric chain hoist with hook suspension

Specification

  • Operating temperature:
    • –20 °C to +40 °C
  • Power supply:
    • Without mains cable
  • Overheating protection:
    • Temperature monitor for lifting motor
  • Control line:
    • Length corresponds to the chain length
  • Impact protector:
    • Limit position switch-off for limiting the highest and lowest load position
  • Operating voltage:
    • 400 V, 3 ph, 50 Hz
  • Insulation class:
    • F
  • Overload protection:
    • Friction coupling
  • Chain stores:
    • including
  • Protection class:
    • IP 55
  • Lifting method:
    • Main and fine stroke
  • Controller:
    • Contactor control 24V AC
Please login to see prices
More information
Permanent load-lifting magnet N
Permanent load-lifting magnet N

Specification

  • Type:
    • Permanent load-lifting magnet
  • Standard:
    • DIN EN 13155
  • Safety factor:
    • 3.5
  • Operating temperature:
    • –10 °C to +80 °C
  • Magnet surface Coating:
    • nickel-plated
  • Control lever:
    • backlash-free
    • self-braking
  • Suspension:
    • Rigid attachment eye
  • Range of application Magnets:
    • Transport
  • load types Magnets:
    • Thin tubes
    • Thin sheet metal
Please login to see prices
More information
CX-ALU mini pulley block
CX-ALU mini pulley block

Specification

  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Safety factor:
    • 4
  • Operating temperature:
    • –40 °C to +60 °C
  • Chain surface:
    • galvanized
  • Socket body material:
    • Aluminum
  • Overload protection:
    • Friction coupling
Please login to see prices
More information
Permanent load-lifting magnet V
Permanent load-lifting magnet V

Specification

  • Type:
    • Permanent load-lifting magnet
  • Standard:
    • DIN EN 13155
  • Safety factor:
    • 3.5
  • Operating temperature:
    • –10 °C to +150 °C
  • Magnet surface Coating:
    • nickel-plated
  • Control lever:
    • self-braking
    • backlash-free
  • Suspension:
    • Rigid attachment eye
  • Range of application Magnets:
    • Transport
  • load types Magnets:
    • Beams/Hot Parts
Please login to see prices
More information
Vertical system LIFT
Vertical system LIFT

Specification

  • Type:
    • Permanent load-lifting magnet
  • Standard:
    • DIN EN 13155
  • Safety factor:
    • 3.5
  • Operating temperature:
    • –10 °C to +80 °C
  • Magnet surface Coating:
    • nickel-plated
  • Control lever:
    • backlash-free
    • self-braking
  • Suspension:
    • Suspension Ring
  • Range of application Magnets:
    • Rotate
    • move
    • Transport
  • load types Magnets:
    • Standard
Please login to see prices
More information
Load-lifting magnetic spreader beam
Load-lifting magnetic spreader beam

Specification

  • Type:
    • Permanent load-lifting magnet
  • Standard:
    • DIN EN 13155
  • Safety factor:
    • 3.5
  • Operating temperature:
    • –10 °C to +80 °C
  • Magnet surface Coating:
    • nickel-plated
  • Control lever:
    • backlash-free
    • self-braking
  • Suspension:
    • Suspension Ring
  • Range of application Magnets:
    • Transport
  • load types Magnets:
    • Long workpieces
Please login to see prices
More information
Permanent load-lifting magnet TML
Permanent load-lifting magnet TML

Specification

  • Type:
    • Permanent load-lifting magnet
  • Standard:
    • DIN EN 13155
  • Safety factor:
    • 3
  • Operating temperature:
    • –10 °C to +60 °C
  • Magnet surface Coating:
    • Titanium nitride coating
  • Control lever:
    • TML 500: adjustable oil damper for absorbing the recoil energy of the activation lever
  • Suspension:
    • Rotating attachment points
  • Range of application Magnets:
    • Transport
  • load types Magnets:
    • Thin sheet metal
Please login to see prices
More information
LX-ALU mini lever hoist
LX-ALU mini lever hoist

Specification

  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Safety factor:
    • 4
  • Operating temperature:
    • –40 °C to +60 °C
  • Socket body material:
    • Aluminum
  • Suitability for application:
    • Cargo lashing equipment
    • Attachment technology
Please login to see prices
More information
Permanent magnet transporter
Permanent magnet transporter

Specification

  • Type:
    • Permanent magnet transporter
  • Safety factor:
    • SH 12: 2, SH 35 K: 3
  • Operating temperature:
    • –10 °C to +80 °C
  • Suspension:
    • Rigid attachment eye
  • Range of application Magnets:
    • Transport
  • load types Magnets:
    • Standard
Please login to see prices
More information
Dynamometer Loadlink Plus
Dynamometer Loadlink Plus

Specification

  • Operating temperature:
    • –10 °C to +50 °C
  • Protection class:
    • IP65
  • Battery type:
    • 9V block battery
  • Battery lifetime (continuous operation):
    • 80
  • Version Weighing devices:
    • Dynamometer
  • Certification:
    • Calibration certificate included
  • Display:
    • on the measuring device
Please login to see prices
More information
Star-Speedline electric chain hoist with manual running gear
Star-Speedline electric chain hoist with manual running gear

Specification

  • Operating temperature:
    • –20 °C to +40 °C
  • Power supply:
    • Without mains cable
  • Overheating protection:
    • Temperature monitor for lifting motor
  • Control line:
    • Length corresponds to the chain length
  • Impact protector:
    • Limit position switch-off for limiting the highest and lowest load position
  • Operating voltage:
    • 400 V, 3 ph, 50 Hz
  • Insulation class:
    • F
  • Overload protection:
    • Friction coupling
  • Chain stores:
    • including
  • Protection class:
    • IP 55
  • Lifting method:
    • Main and fine stroke
  • Controller:
    • Contactor control 24V AC
Please login to see prices
More information
HIT-Permanent load lifting magnet
HIT-Permanent load lifting magnet

Specification

  • Type:
    • Permanent load-lifting magnet
  • Standard:
    • DIN EN 13155
  • Safety factor:
    • 3
  • Operating temperature:
    • –10 °C to +60 °C
  • Magnet surface Coating:
    • nickel-plated
  • Control lever:
    • not self-braking
  • Suspension:
    • Rigid attachment eye
  • Range of application Magnets:
    • Transport
  • load types Magnets:
    • Standard
Please login to see prices
More information
Star-Speedline electric chain hoist with electric running gear
Star-Speedline electric chain hoist with electric running gear

Specification

  • Operating temperature:
    • –20 °C to +40 °C
  • Power supply:
    • Without mains cable
  • Overheating protection:
    • Temperature monitor for lifting motor
  • Control line:
    • Length corresponds to the chain length
  • Impact protector:
    • Limit position switch-off for limiting the highest and lowest load position
  • Operating voltage:
    • 400 V, 3 ph, 50 Hz
  • Insulation class:
    • F
  • Overload protection:
    • Friction coupling
  • Chain stores:
    • including
  • Protection class:
    • IP 55
  • Lifting method:
    • Main and fine stroke
  • Controller:
    • Contactor control 24V AC
Please login to see prices
More information
Dynamometer Wirelink Plus
Dynamometer Wirelink Plus

Specification

  • Operating temperature:
    • –10 °C to +50 °C
  • Protection class:
    • IP67
  • Battery type:
    • 9V block battery
  • Battery lifetime (continuous operation):
    • 80
  • Version Weighing devices:
    • Dynamometer
  • Certification:
    • Calibration certificate included
  • Display:
    • Remotely readable by wire
Please login to see prices
More information
* plus shipping

nach oben

PFEIFER Webshop - Attachment devices | Cargo lashing equipment | Lifting devices
Contact Newsletter Returns