Hoists and winches

Lifting devices and winches are used for lifting and moving loads both vertically and horizontally. PFEIFER offer a large selection of suitable products in further areas of application, with which almost all lifting and movement procedures can be covered. From hoists such as hand or e READ MORE
Lifting devices and winches are used for lifting and moving loads both vertically and horizontally. PFEIFER offer a large selection of suitable products in further areas of application, with which almost all lifting and movement procedures can be covered. From hoists such as hand or electric chain hoists, winches and rope hoists, weighing devices, transport device and tool hydraulics, the PFEIFER product range covers everything. We also assist you with technical questions around your application and with the configuration of individual special solutions. READ LESS

Lifting devices from PFEIFER are suitable for "lifting from above" and...

Permanent load lifting magnets from PFEIFER enable the simple and safe...

Tension dynamometers and crane scales from PFEIFER are the best choice when...

Transport devices from PFEIFER are intended for the in-plant transport of...

PFEIFER offers various winches, rope hoists and pulleys for your application.

Specification

  • Version Weighing devices:
    • Crane scales
  • Display:
    • on the measuring device
  • Protection class:
    • IP40
  • Battery type:
    • 4 x AA
  • Operating temperature:
    • –10 °C to +40 °C
  • Battery lifetime (continuous operation):
    • 40

Specification

  • Standard:
    • EN 13157
  • Socket body material:
    • Aluminum
  • Safety factor:
    • 4
  • Overload protection:
    • Shear pins
  • Rope hoist rope:
    • Rope length unlimited

Specification

  • Safety factor:
    • 4
  • Operating temperature:
    • –20 °C to +40 °C
  • Socket body material:
    • Stainless steel
  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157

Specification

  • Load contact surface Material:
    • Rubber (abrasion-resistant)
  • Shaft Surface:
    • galvanized
  • Rolls Material:
    • Polyurethane
  • Suspension:
    • Rigid attachment eye (from 12 t)

Specification

  • Suitability for application:
    • Attachment technology
  • Standard:
    • Hoist: EN 13157
    • Chain: EN 818-7
  • Operating temperature:
    • –10 °C to +50 °C
    • reduced working load limits outside this range – before use at ambient temperatures < 0 °C, check if the brake is iced up by lifting and lowering a small load 2 - 3 times
  • Safety factor:
    • 4
  • Socket body material:
    • Aluminum

Specification

  • Safety factor:
    • 2 (designated permissible tensile force)
  • Rolls Material:
    • Steel (galvanized and with ball bearings)
  • Socket body material:
    • Sheet steel

Specification

  • Operating temperature:
    • –40 °C to +60 °C
  • Safety factor:
    • 4
  • Socket body material:
    • Powder-coated sheet steel
  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Suitability for application:
    • Attachment technology
    • Cargo lashing equipment

Specification

  • Rolls Material:
    • Steel (galvanized and with ball bearings)
  • Safety factor:
    • 2 (designated permissible tensile force)
  • Socket body material:
    • Sheet steel
  • Suspension:
    • hook suspension gear

Specification

  • Technical note:
    • Increase in the carrying capacity possible through reeving by means of pulley block principle (2 x 100 kg or 2 x 300 kg and 1.9 x 300 kg).

* plus shipping

nach oben