Hoists and winches

Lifting devices and winches are used for lifting and moving loads both vertically and horizontally. PFEIFER offer a large selection of suitable products in further areas of application, with which almost all lifting and movement procedures can be covered. From hoists such as hand or e READ MORE
Lifting devices and winches are used for lifting and moving loads both vertically and horizontally. PFEIFER offer a large selection of suitable products in further areas of application, with which almost all lifting and movement procedures can be covered. From hoists such as hand or electric chain hoists, winches and rope hoists, weighing devices, transport device and tool hydraulics, the PFEIFER product range covers everything. We also assist you with technical questions around your application and with the configuration of individual special solutions. READ LESS
Hoists

"Lifting devices from PFEIFER are suitable for ""lifting from above"" and...

Hoists
Load lifting magnets

Permanent load lifting magnets from PFEIFER enable the simple and safe...

Load lifting magnets
Scales

Tension dynamometers and crane scales from PFEIFER are the best choice when...

Scales
Transport devices

Transport devices from PFEIFER are intended for the in-plant transport of...

Transport devices
Winches and rope hoists

PFEIFER offers various winches, rope hoists and pulleys for your application.

Winches and rope hoists
Crane scales Multi
Crane scales Multi

Specification

  • Operating temperature:
    • –10 °C to +40 °C
  • Protection class:
    • IP40
  • Battery type:
    • 4 x AA
  • Battery lifetime (continuous operation):
    • 40
  • Version Weighing devices:
    • Crane scales
  • Display:
    • on the measuring device
Please login to see prices
More information
TU grip hoist-rope hoist
TU grip hoist-rope hoist

Specification

  • Standard:
    • EN 13157
  • Safety factor:
    • 4
  • Socket body material:
    • Aluminum
  • Overload protection:
    • Shear pins
  • Rope hoist rope:
    • Rope length unlimited
Please login to see prices
More information
Inox Star stainless steel pulley block
Inox Star stainless steel pulley block

Specification

  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Safety factor:
    • 4
  • Operating temperature:
    • –20 °C to +40 °C
  • Socket body material:
    • Stainless steel
Please login to see prices
More information
Transport trolley set
Transport trolley set

Specification

  • Shaft Surface:
    • galvanized
  • Rolls Material:
    • Polyurethane
  • Load contact surface Material:
    • Rubber (abrasion-resistant)
  • Suspension:
    • Rigid attachment eye (from 12 t)
Please login to see prices
More information
Lever hoist AL
Lever hoist AL

Specification

  • Standard:
    • Hoist: EN 13157
    • Chain: EN 818-7
  • Safety factor:
    • 4
  • Operating temperature:
    • –10 °C to +50 °C
    • reduced working load limits outside this range - before use at ambient temperatures < 0 °C, check if the brake is iced up by lifting and lowering a small load 2 - 3 times
  • Socket body material:
    • Aluminum
  • Suitability for application:
    • Attachment technology
Please login to see prices
More information
Rope pulley
Rope pulley

Specification

  • Safety factor:
    • 2 (designated permissible tensile force)
  • Socket body material:
    • Sheet steel
  • Rolls Material:
    • Steel (galvanized and with ball bearings)
Please login to see prices
More information
Roller running gear Ecodur
Roller running gear Ecodur

Specification

  • Version:
    • Roller running gear
Please login to see prices
More information
LB lever hoist
LB lever hoist

Specification

  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Safety factor:
    • 4
  • Operating temperature:
    • –40 °C to +60 °C
  • Socket body material:
    • Powder-coated sheet steel
  • Suitability for application:
    • Attachment technology
    • Cargo lashing equipment
Please login to see prices
More information
Rope pulley, can be opened
Rope pulley, can be opened

Specification

  • Safety factor:
    • 2 (designated permissible tensile force)
  • Socket body material:
    • Sheet steel
  • Rolls Material:
    • Steel (galvanized and with ball bearings)
  • Suspension:
    • hook suspension gear
Please login to see prices
More information
MINIOFOR continuous winch
MINIOFOR continuous winch

Specification

  • Technical note:
    • Increase in the carrying capacity possible through reeving by means of pulley block principle (2 x 100 kg or 2 x 300 kg and 1.9 x 300 kg).
Please login to see prices
More information
Radio remote control for Star-Speedline electric chain hoist
Radio remote control for Star-Speedline electric chain hoist

Specification

  • Battery lifetime (continuous operation):
    • 30
  • Protection class:
    • IP 65
Please login to see prices
More information
HIT hydraulic jack
HIT hydraulic jack

Specification

  • Standard:
    • DIN EN 1494
  • Drive type:
    • hydraulic
Please login to see prices
More information
PC-HHP wired remote read-out device
PC-HHP wired remote read-out device

Specification

  • Battery type:
    • 9V block battery
  • Battery lifetime (continuous operation):
    • 80
  • Version Weighing devices:
    • Remote reading device
Please login to see prices
More information
Rope pulley
Rope pulley

Specification

  • Safety factor:
    • 2 (designated permissible tensile force)
  • Socket body material:
    • Sheet steel
  • Rolls Material:
    • Steel (galvanized and with ball bearings)
  • Suspension:
    • bolt suspension
Please login to see prices
More information
HIT steel winch Type 100
HIT steel winch Type 100

Specification

  • Standard:
    • DIN 7355
  • Drive type:
    • Rack and pinion winch
  • Technical note:
    • Fold-out drive crank, foot claw not adjustable, housing not rotatable.
Please login to see prices
More information
Roller running gear
Roller running gear

Specification

  • Version:
    • Roller running gear
Please login to see prices
More information
PFEIFER rope hoist - standard
PFEIFER rope hoist - standard

Specification

  • Standard:
    • EN 13157
  • Safety factor:
    • 4
  • Socket body material:
    • Aluminum
  • Overload protection:
    • Shear pins
  • Rope hoist rope:
    • Rope length unlimited
Please login to see prices
More information
RHINO lever hoist
RHINO lever hoist

Specification

  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Safety factor:
    • 4
  • Operating temperature:
    • reduced carrying capacities outside this range
    • –10 °C to +50 °C
  • Socket body material:
    • Powder-coated sheet steel
  • Suitability for application:
    • Attachment technology
    • Cargo lashing equipment
Please login to see prices
More information
RHINO pulley block
RHINO pulley block

Specification

  • Standard:
    • Hoist: EN 13157
    • Chain: EN 818-7
  • Safety factor:
    • 4
  • Operating temperature:
    • –25 °C to +40 °C
  • Chain surface:
    • galvanized
  • Socket body material:
    • Sheet steel
Please login to see prices
More information
Pulley block 360° with rotating hand chain
Pulley block 360° with rotating hand chain

Specification

  • Standard:
    • Hoist: EN 13157
    • Chain: EN 818-7
  • Safety factor:
    • 4
  • Operating temperature:
    • –25 °C to +50 °C
  • Chain surface:
    • galvanised and chromated yellow
  • Socket body material:
    • Powder-coated sheet steel
Please login to see prices
More information
* plus shipping

nach oben

PFEIFER Webshop - Attachment devices | Cargo lashing equipment | Lifting devices
Contact Newsletter Returns