Hoists

Lifting devices from PFEIFER are suitable for "lifting from above" and "lifting from below". The category "lifting from above" includes electric chain hoists and manual hoists. The lifting device is situated above the load. The category "lifting from below" includes steel winches and READ MORE
Lifting devices from PFEIFER are suitable for "lifting from above" and "lifting from below". The category "lifting from above" includes electric chain hoists and manual hoists. The lifting device is situated above the load. The category "lifting from below" includes steel winches and hydraulic jacks. In this case the lifting device is situated underneath the load. READ LESS

Manually operated pulley blocks from PFEIFER are used in the most diverse...

Lifting procedures can be implemented quickly, efficiently and with less...

Like steel winches, hydraulic jacks from PFEIFER are suitable for use...

Manually operated lever hoists from PFEIFER are used in the most diverse...

In combination with an electric chain hoist, compressed air hoist or manual...

Steel winches from PFEIFER are suitable for use wherever machines and loads...

Specification

  • Housing material:
    • Stainless steel
  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Safety factor:
    • 4
  • Operating temperature:
    • –20 °C to +40 °C

Specification

  • Operating temperature:
    • –10 °C to +50 °C
    • reduced working load limits outside this range – before use at ambient temperatures < 0 °C, check if the brake is iced up by lifting and lowering a small load 2 - 3 times
  • Safety factor:
    • 4
  • Housing material:
    • Aluminum
  • Suitability for application:
    • Attachment technology
  • Standard:
    • Hoist: EN 13157
    • Chain: EN 818-7

Specification

  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Suitability for application:
    • Attachment technology
    • Cargo lashing equipment
  • Operating temperature:
    • –40 °C to +60 °C
  • Safety factor:
    • 4
  • Housing material:
    • Powder-coated sheet steel

Specification

  • Protection class:
    • IP 65
  • Battery lifetime (continuous operation):
    • 30

Specification

  • Standard:
    • DIN EN 1494
  • Drive type:
    • hydraulic

Specification

  • Standard:
    • DIN 7355
  • Technical note:
    • Fold-out drive crank, foot claw not adjustable, housing not rotatable.
  • Drive type:
    • Rack and pinion winch

Specification

  • Version:
    • Roller running gear

Specification

  • Suitability for application:
    • Cargo lashing equipment
    • Attachment technology
  • Operating temperature:
    • reduced carrying capacities outside this range
    • –10 °C to +50 °C
  • Standard:
    • Hoist: EN 13157
    • Chain: EN 818-7
  • Housing material:
    • Powder-coated sheet steel
  • Safety factor:
    • 4

Specification

  • Chain surface:
    • galvanized
  • Standard:
    • Chain: EN 818-7
    • Hoist: EN 13157
  • Housing material:
    • Sheet steel
  • Safety factor:
    • 4
  • Operating temperature:
    • –25 °C to +40 °C

Specification

  • Standard:
    • Hoist: EN 13157
    • Chain: EN 818-7
  • Housing material:
    • Powder-coated sheet steel
  • Safety factor:
    • 4
  • Operating temperature:
    • –25 °C to +50 °C
  • Chain surface:
    • galvanised and chromated yellow

Specification

  • Standard:
    • DIN 7355
  • Drive type:
    • Rack and pinion winch
  • Technical note:
    • Fold-out drive crank, foot claw not adjustable, housing not rotatable.

Specification

  • Version:
    • Reel chassis

Specification

  • Suitability for application:
    • Attachment technology
    • Cargo lashing equipment
  • Safety factor:
    • 4
  • Housing material:
    • Aluminum
  • Operating temperature:
    • –10 °C to +50 °C
  • Standard:
    • Hoist: EN 13157
    • Chain: EN 818-7

Specification

  • Version:
    • Beam clamp

Specification

  • Operating temperature:
    • –25 °C to +50 °C
  • Standard:
    • EN 13157
  • Chain surface:
    • galvanised and chromated yellow
  • Safety factor:
    • 4
  • Housing material:
    • Powder-coated sheet steel

Specification

  • Standard:
    • DIN 7355
  • Technical note:
    • Fold-out drive crank, foot claw adjustable, housing not rotatable.
  • Drive type:
    • Rack and pinion winch

Specification

  • Operating temperature:
    • reduced working load limits outside this range – before use at ambient temperatures < 0 °C, check if the brake is iced up by lifting and lowering a small load 2 - 3 times
    • –10 °C to +50 °C
  • Standard:
    • Hoist: EN 13157
    • Chain: EN 818-7
  • Suitability for application:
    • Cargo lashing equipment
    • Attachment technology
  • Safety factor:
    • 4
  • Housing material:
    • Malleable iron

Specification

  • Operating temperature:
    • –20 °C to +40 °C
  • Control line:
    • Length corresponds to the chain length
  • Insulation class:
    • F
  • Controller:
    • Contactor control 24V AC
  • Overload protection:
    • Friction coupling
  • Operating voltage:
    • 400 V, 3 ph, 50 Hz
  • Protection class:
    • IP 55
  • Impact protector:
    • Limit position switch-off for limiting the highest and lowest load position
  • Lifting method:
    • Main and fine stroke
  • Chain stores:
    • including
  • Overheating protection:
    • Temperature monitor for lifting motor

Specification

  • Control line:
    • Length corresponds to the chain length
  • Impact protector:
    • Limit position switch-off for limiting the highest and lowest load position
  • Operating voltage:
    • 400 V, 3 ph, 50 Hz
  • Controller:
    • Contactor control 24V AC
  • Power supply:
    • Without mains cable
  • Operating temperature:
    • –20 °C to +40 °C
  • Protection class:
    • IP 55
  • Overheating protection:
    • Temperature monitor for lifting motor
  • Insulation class:
    • F
  • Chain stores:
    • including
  • Overload protection:
    • Friction coupling
  • Lifting method:
    • Main and fine stroke

* plus shipping

nach oben