de
en
Benefits
- Extremely safe – avoidance of incorrect loading through optimum alignment of the bolt-on swivel in the load direction – even when subjected to tensile load
- Comfortable use through optimum support surface, readable angle of inclination and squeezing marks on the load ring (no kinking of the load ring)
- Additionally tested safety: DGUV-certified with H-stamp
Technical data
Operating temperature
Load angle
± 90°Identification mark
Batch numberAttachment
Screw-inStandard
EN 1677-1Range of application Attachment devices
Attachment technologySafety factor
4Tilting
180°Rotation
360° (under load)Type of attachment
multi-legQuality grade
10Certification
H-stampDimensions
Options
Options on request
Option thread
Option Identification mark
Safety instructions
Handling
1.If the bolt-on swivel is to remain permanently on the load or used for rotating loads and turning them over, then it will be necessary to tighten it to a higher torque according to the product table.
2.For a once-only transport procedure, tighten hand-tight using a suitable tool (e.g. open-ended spanner according to DIN 895 or DIN 894) until lying flat against the contact surface. If the bolt-on swivel is to remain permanently on the load or used for ro
CAD
Planning
-
Dimensions
Dimensions
-
Safety instructions
Safety instructions
-
CAD
CAD
Planning
Benefits
- Extremely safe – avoidance of incorrect loading through optimum alignment of the bolt-on swivel in the load direction – even when subjected to tensile load
- Comfortable use through optimum support surface, readable angle of inclination and squeezing marks on the load ring (no kinking of the load ring)
- Additionally tested safety: DGUV-certified with H-stamp
Technical data
Operating temperature
Load angle
± 90°Identification mark
Batch numberAttachment
Screw-inStandard
EN 1677-1Range of application Attachment devices
Attachment technologySafety factor
4Tilting
180°Rotation
360° (under load)Type of attachment
multi-legQuality grade
10Certification
H-stampDimensions
Options
Options on request
Option thread
Option Identification mark
Safety instructions
Handling
1.If the bolt-on swivel is to remain permanently on the load or used for rotating loads and turning them over, then it will be necessary to tighten it to a higher torque according to the product table.
2.For a once-only transport procedure, tighten hand-tight using a suitable tool (e.g. open-ended spanner according to DIN 895 or DIN 894) until lying flat against the contact surface. If the bolt-on swivel is to remain permanently on the load or used for ro
CAD
Planning
-
Dimensions
Dimensions
-
Safety instructions
Safety instructions
-
CAD
CAD
Planning