Product 215 of 280

Bolt-on swivel type G10 Pro

High-quality standard bolt-on swivel - also for turning and reversing operations. Intelligent alternative to the conventional eye bolt.

Operating temperature: reduced carrying capacities outside this range
Operating temperature: –40 °C to +200 °C
Quality grade: 10

Configure

Configuration
Further information

Bolt-on swivel type G10 Pro

01 Thread diameter metric

02 WLL [kg]

300
500
700
1000
1400
1700
2500
4000
6700
8000
10000
12500
16000
17000
18000
28000

Included raw material surcharge per unit

Expected shipping date

Estimated delivery time by shipping service provider 2 business days

Please login to see prices

Add to wish list
Compare
Questions about product

Benefits
Technical data
Dimensions
Options
Handling
CAD

Benefits

Extremely safe – avoidance of incorrect loading through optimum alignment of the bolt-on swivel in the load direction – even when subjected to tensile load
Additionally tested safety: DGUV-certified with H-stamp

Technical data

Range of application Attachment devices

Attachment technology

Rotation

360° (under load)

Tilting

180°

Identification mark

Batch number

Type of attachment

multi-leg

Standard

EN 1677-1

Safety factor

Operating temperature

reduced carrying capacities outside this range

–40 °C to +200 °C

Load angle

± 90°

Quality grade

Certification

H-stamp

Attachment

Screw-in

Dimensions

Options

Options on request

in weldable design up to 17 t

in special designs

Option thread

with internal thread up to 5 t

with UNC thread and other thread types

Option Identification mark

with RFID chip

with individual serial number or labelling

A selection of the options available on request can be found below. Please contact us for your individual offer!

Handling

1.Do not use an extension.

2.Do not exceed the tightening torques specified in the product table (values specified are maximum values)!

3.For the installation it is sufficient to tighten the bolt-on swivel manually using a suitable tool (e.g. open-ended spanner conforming to DIN 895 or DIN 894).

4.Bolt-on swivel must be tightened so that it is fully contacting the support surface. Then check that the upper part rotates freely and easily.

CAD

Planning

No title

CAD 3D

3D-Daten| Anschraubwirbel G10 Pro

FDI_PRODUCT_DOWNLOADS

Benefits
Benefits
- Extremely safe – avoidance of incorrect loading through optimum alignment of the bolt-on swivel in the load direction – even when subjected to tensile load
- Additionally tested safety: DGUV-certified with H-stamp
Technical data
Technical data
Range of application Attachment devices
Rotation
Tilting
Identification mark
Type of attachment
Standard
Safety factor
Operating temperature
- reduced carrying capacities outside this range
- –40 °C to +200 °C
Load angle
Quality grade
Certification
Attachment
Dimensions

Dimensions
Options
Options
Options on request
- in weldable design up to 17 t
- in special designs
Option thread
- with internal thread up to 5 t
- with UNC thread and other thread types
Option Identification mark
- with RFID chip
- with individual serial number or labelling
Handling

Handling

1.Do not use an extension.

2.Do not exceed the tightening torques specified in the product table (values specified are maximum values)!

3.For the installation it is sufficient to tighten the bolt-on swivel manually using a suitable tool (e.g. open-ended spanner conforming to DIN 895 or DIN 894).

4.Bolt-on swivel must be tightened so that it is fully contacting the support surface. Then check that the upper part rotates freely and easily.
CAD

CAD

Planning

No title

CAD 3D

3D-Daten| Anschraubwirbel G10 Pro
FDI_PRODUCT_DOWNLOADS

Benefits
Technical data
Dimensions
Options
Handling
CAD