Pro attachment eye thread / C806X

Pro attachment eye thread / C806X

Superior quality rotating attachment eye with large stirrup, optimally suited for lateral attachment at top price.
  • Quality grade: 10
  • Operating temperature: reduced carrying capacities outside this range
  • Operating temperature: –40 °C to +200 °C
Configure

Pro attachment eye thread / C806X

Pro attachment eye thread / C806X
Please login to see prices

Benefits

  • Flexible – ideally suited for multi-leg attachment
  • Safe – avoidance of incorrect loading through optimum alignment of the stirrup in the load direction
  • Space-saving due to folding load ring
  • Wide load ring for the simple attachment of hooks

Technical data

Operating temperature

  • –40 °C to +200 °C
  • reduced carrying capacities outside this range

    • Safety factor

    4

    Certification

    H-stamp

    Standard

    EN 1677-1

    Tilting

    180°

    Load angle

    0° - 120°

    Range of application Attachment devices

    Attachment technology

    Quality grade

    10

    Rotation

    360° (not under load)

    Identification mark

    Batch number

    Type of attachment

    multi-leg

    Attachment

    Screw-in

    Dimensions

    Options

    Option Identification mark

  • with RFID chip
  • with individual serial number or labelling

    • A selection of the options available on request can be found below. Please contact us for your individual offer!

    Option thread

  • with UNC thread
  • special threads
  • Variable thread lengths

    • Safety instructions

    Please note the admissible load angle.

    Handling

    1.Eye bolt must be tightened so that it is fully contacting the support surface. Then check that the upper part rotates freely and easily.

    2.Do not use an extension.

    3.Do not exceed the tightening torques specified in the product table (values specified are maximum values)!

    4.For the installation it is sufficient to tighten the bolt-on swivel manually using a suitable tool (e.g. open-ended spanner conforming to DIN 895 or DIN 894).

    CAD

    Planning

    No title

    CAD 3D

    3D-Daten| Lastbock Gewinde G10 Pro

    FDI_PRODUCT_DOWNLOADS
    • Benefits

      Benefits

      • Flexible – ideally suited for multi-leg attachment
      • Safe – avoidance of incorrect loading through optimum alignment of the stirrup in the load direction
      • Space-saving due to folding load ring
      • Wide load ring for the simple attachment of hooks
    • Technical data

      Technical data

      Operating temperature

      • –40 °C to +200 °C
      • reduced carrying capacities outside this range

      Safety factor

        4

      Certification

        H-stamp

      Standard

        EN 1677-1

      Tilting

        180°

      Load angle

        0° - 120°

      Range of application Attachment devices

        Attachment technology

      Quality grade

        10

      Rotation

        360° (not under load)

      Identification mark

        Batch number

      Type of attachment

        multi-leg

      Attachment

        Screw-in
    • Dimensions

      Dimensions

      Dimension picture

    • Options

      Options

      Option Identification mark

      • with RFID chip
      • with individual serial number or labelling

        A selection of the options available on request can be found below. Please contact us for your individual offer!

      Option thread

      • with UNC thread
      • special threads
      • Variable thread lengths
    • Safety instructions

      Safety instructions

      Please note the admissible load angle.

    • Handling

      Handling

      1.Eye bolt must be tightened so that it is fully contacting the support surface. Then check that the upper part rotates freely and easily.

      2.Do not use an extension.

      3.Do not exceed the tightening torques specified in the product table (values specified are maximum values)!

      4.For the installation it is sufficient to tighten the bolt-on swivel manually using a suitable tool (e.g. open-ended spanner conforming to DIN 895 or DIN 894).

    • CAD

      CAD

      Planning

      No title

      CAD 3D

      3D-Daten| Lastbock Gewinde G10 Pro

      FDI_PRODUCT_DOWNLOADS
    * plus shipping

    nach oben

    PFEIFER Webshop - Attachment devices | Cargo lashing equipment | Lifting devices