Benefits
- Additionally tested safety: DGUV-certified with H-stamp
- Flexible – ideally suited for multi-leg attachment
- Safe – avoids incorrect loading through optimum alignment of the eyebolt in the load direction
- With fixed key plate for simple and fast assembly
Technical data
Operating temperature
Certification
H-stampRotation
360° (not under load)Identification mark
Batch numberTilting
rigidSafety factor
4Standard
EN 1677-1Type of attachment
multi-legQuality grade
10Range of application Attachment devices
Attachment technologyAttachment
Screw-inDimensions
Options
Option thread
Option Identification mark
Safety instructions
Please note the admissible load angle.
Handling
1.Do not exceed the tightening torques specified in the product table (values specified are maximum values)!
2.Eye bolt must be tightened so that it is fully contacting the support surface. Then check that the upper part rotates freely and easily.
3.Do not use an extension.
CAD
Planning
-
Benefits
Benefits
- Additionally tested safety: DGUV-certified with H-stamp
- Flexible – ideally suited for multi-leg attachment
- Safe – avoids incorrect loading through optimum alignment of the eyebolt in the load direction
- With fixed key plate for simple and fast assembly
-
Technical data
Technical data
Operating temperature
- reduced carrying capacities outside this range
- –40 °C to +200 °C
Certification
- H-stamp
Rotation
- 360° (not under load)
Identification mark
- Batch number
Tilting
- rigid
Safety factor
- 4
Standard
- EN 1677-1
Type of attachment
- multi-leg
Quality grade
- 10
Range of application Attachment devices
- Attachment technology
Attachment
- Screw-in
-
Dimensions
Dimensions
-
Options
Options
Option thread
- with UNC thread
- with internal thread (caution: other dimensions of the load ring)
- with special thread length (caution: other dimensions of the load ring)
Option Identification mark
- with RFID chip
- with individual serial number or labelling
- A selection of the options available on request can be found below. Please contact us for your individual offer!
-
Safety instructions
Safety instructions
Please note the admissible load angle.
-
Handling
Handling
1.Do not exceed the tightening torques specified in the product table (values specified are maximum values)!
2.Eye bolt must be tightened so that it is fully contacting the support surface. Then check that the upper part rotates freely and easily.
3.Do not use an extension.
-
CAD
CAD
Planning
Benefits
- Additionally tested safety: DGUV-certified with H-stamp
- Flexible – ideally suited for multi-leg attachment
- Safe – avoids incorrect loading through optimum alignment of the eyebolt in the load direction
- With fixed key plate for simple and fast assembly
Technical data
Operating temperature
Certification
H-stampRotation
360° (not under load)Identification mark
Batch numberTilting
rigidSafety factor
4Standard
EN 1677-1Type of attachment
multi-legQuality grade
10Range of application Attachment devices
Attachment technologyAttachment
Screw-inDimensions
Options
Option thread
Option Identification mark
Safety instructions
Please note the admissible load angle.
Handling
1.Do not exceed the tightening torques specified in the product table (values specified are maximum values)!
2.Eye bolt must be tightened so that it is fully contacting the support surface. Then check that the upper part rotates freely and easily.
3.Do not use an extension.
CAD
Planning
-
Benefits
Benefits
- Additionally tested safety: DGUV-certified with H-stamp
- Flexible – ideally suited for multi-leg attachment
- Safe – avoids incorrect loading through optimum alignment of the eyebolt in the load direction
- With fixed key plate for simple and fast assembly
-
Technical data
Technical data
Operating temperature
- reduced carrying capacities outside this range
- –40 °C to +200 °C
Certification
- H-stamp
Rotation
- 360° (not under load)
Identification mark
- Batch number
Tilting
- rigid
Safety factor
- 4
Standard
- EN 1677-1
Type of attachment
- multi-leg
Quality grade
- 10
Range of application Attachment devices
- Attachment technology
Attachment
- Screw-in
-
Dimensions
Dimensions
-
Options
Options
Option thread
- with UNC thread
- with internal thread (caution: other dimensions of the load ring)
- with special thread length (caution: other dimensions of the load ring)
Option Identification mark
- with RFID chip
- with individual serial number or labelling
- A selection of the options available on request can be found below. Please contact us for your individual offer!
-
Safety instructions
Safety instructions
Please note the admissible load angle.
-
Handling
Handling
1.Do not exceed the tightening torques specified in the product table (values specified are maximum values)!
2.Eye bolt must be tightened so that it is fully contacting the support surface. Then check that the upper part rotates freely and easily.
3.Do not use an extension.
-
CAD
CAD
Planning