Technical data
Standard
EN 1677-1Load angle
± 45°Type of attachment
1-legIdentification mark
Batch numberTilting
180°Attachment
weldableRotation
rigidRange of application Attachment devices
Attachment technologyOperating temperature
Quality grade
8Safety factor
4Dimensions
Options
Option Identification mark
with individual serial number or labellingSafety instructions
Please note the admissible load angle.
Handling
1.Caution: Load ring 180° tiltable and loadable only from 0° to +/–45°!Safe alternative: Weldable hoist ring in quality grade 10 or weldable weld-on eye in quality grade 10, as they are loadable from 0° to +/–90° with the same carrying capacity
2.Welding work to be carried out only by a welder qualified according to EN ISO 9606-1 in compliance with applicable welding standards. Observe the operating instructions!
3.The load ring must be aligned to the pulling direction; it must be freely movable and may not rest on edges or on the attachment point.
-
Technical data
Technical data
Standard
- EN 1677-1
Load angle
- ± 45°
Type of attachment
- 1-leg
Identification mark
- Batch number
Tilting
- 180°
Attachment
- weldable
Rotation
- rigid
Range of application Attachment devices
- Attachment technology
Operating temperature
- reduced carrying capacities outside this range
- –40 °C to +200 °C
Quality grade
- 8
Safety factor
- 4
-
Dimensions
Dimensions
-
Options
Options
- A selection of the options available on request can be found below. Please contact us for your individual offer!
Option Identification mark
- with individual serial number or labelling
-
Safety instructions
Safety instructions
Please note the admissible load angle.
-
Handling
Handling
1.Caution: Load ring 180° tiltable and loadable only from 0° to +/–45°!Safe alternative: Weldable hoist ring in quality grade 10 or weldable weld-on eye in quality grade 10, as they are loadable from 0° to +/–90° with the same carrying capacity
2.Welding work to be carried out only by a welder qualified according to EN ISO 9606-1 in compliance with applicable welding standards. Observe the operating instructions!
3.The load ring must be aligned to the pulling direction; it must be freely movable and may not rest on edges or on the attachment point.
Technical data
Standard
EN 1677-1Load angle
± 45°Type of attachment
1-legIdentification mark
Batch numberTilting
180°Attachment
weldableRotation
rigidRange of application Attachment devices
Attachment technologyOperating temperature
Quality grade
8Safety factor
4Dimensions
Options
Option Identification mark
with individual serial number or labellingSafety instructions
Please note the admissible load angle.
Handling
1.Caution: Load ring 180° tiltable and loadable only from 0° to +/–45°!Safe alternative: Weldable hoist ring in quality grade 10 or weldable weld-on eye in quality grade 10, as they are loadable from 0° to +/–90° with the same carrying capacity
2.Welding work to be carried out only by a welder qualified according to EN ISO 9606-1 in compliance with applicable welding standards. Observe the operating instructions!
3.The load ring must be aligned to the pulling direction; it must be freely movable and may not rest on edges or on the attachment point.
-
Technical data
Technical data
Standard
- EN 1677-1
Load angle
- ± 45°
Type of attachment
- 1-leg
Identification mark
- Batch number
Tilting
- 180°
Attachment
- weldable
Rotation
- rigid
Range of application Attachment devices
- Attachment technology
Operating temperature
- reduced carrying capacities outside this range
- –40 °C to +200 °C
Quality grade
- 8
Safety factor
- 4
-
Dimensions
Dimensions
-
Options
Options
- A selection of the options available on request can be found below. Please contact us for your individual offer!
Option Identification mark
- with individual serial number or labelling
-
Safety instructions
Safety instructions
Please note the admissible load angle.
-
Handling
Handling
1.Caution: Load ring 180° tiltable and loadable only from 0° to +/–45°!Safe alternative: Weldable hoist ring in quality grade 10 or weldable weld-on eye in quality grade 10, as they are loadable from 0° to +/–90° with the same carrying capacity
2.Welding work to be carried out only by a welder qualified according to EN ISO 9606-1 in compliance with applicable welding standards. Observe the operating instructions!
3.The load ring must be aligned to the pulling direction; it must be freely movable and may not rest on edges or on the attachment point.