Anti-slip mat

Anti-slip mat with a guaranteed coefficient of sliding friction of ? = 0.6. The use of this mesh significantly reduces the number of lashing straps required when lashing down. Due to the material thickness, a longer service life is achieved than with thin mesh.

Standard: (VDI 2700 sheet 14)
Coefficient of sliding friction: µ 0.6 at a surface pressure of up to 250 t/m²
Operating temperature: –40 °C to +120 °C

Configure

Configuration
Further information

Anti-slip mat

Please login to see prices

Technical data

Standard

(VDI 2700 sheet 14)

Operating temperature

–40 °C to +120 °C

Coefficient of sliding friction

µ 0.6 at a surface pressure of up to 250 t/m²

Load types Anti-Slip underlays

Standard loads

Handling

1.The friction coefficient attainable under practical conditions depends on the material pairing, the temperature, the condition of the material surfaces and the anti-slip mat.

2.The contact between the friction partners must be maintained in every driving situation.

3.In order to achieve the optimum slip inhibition, the contact areas (load and loading surface) must be dry, clean and free from ice and grease.

4.Intermediate layers must also be provided with anti-slip mats.

5.Anti-slip mats must be designed such that the load and the underlying loading surface do not touch each other. It is not necessary to lay out the entire loading surface with anti-slip mats.

Downloads

Description

Product brochure

FDI_PRODUCT_DOWNLOADS

Technical data
Technical data
Standard
Operating temperature
Coefficient of sliding friction
Load types Anti-Slip underlays
Handling

Handling

1.The friction coefficient attainable under practical conditions depends on the material pairing, the temperature, the condition of the material surfaces and the anti-slip mat.

2.The contact between the friction partners must be maintained in every driving situation.

3.In order to achieve the optimum slip inhibition, the contact areas (load and loading surface) must be dry, clean and free from ice and grease.

4.Intermediate layers must also be provided with anti-slip mats.

5.Anti-slip mats must be designed such that the load and the underlying loading surface do not touch each other. It is not necessary to lay out the entire loading surface with anti-slip mats.
Downloads

Downloads

Description

Product brochure

FDI_PRODUCT_DOWNLOADS