Technical data
Coefficient of sliding friction
µ 0.6 at a surface pressure of up to 250 t/m²Standard
(VDI 2700 sheet 14)Operating temperature
–40 °C to +120 °CLoad types Anti-Slip underlays
Standard loadsHandling
1.Anti-slip mats must be designed such that the load and the underlying loading surface do not touch each other. It is not necessary to lay out the entire loading surface with anti-slip mats.
2.The friction coefficient attainable under practical conditions depends on the material pairing, the temperature, the condition of the material surfaces and the anti-slip mat.
3.The contact between the friction partners must be maintained in every driving situation.
4.In order to achieve the optimum slip inhibition, the contact areas (load and loading surface) must be dry, clean and free from ice and grease.
5.Intermediate layers must also be provided with anti-slip mats.
Downloads
Description
-
Technical data
Technical data
Coefficient of sliding friction
- µ 0.6 at a surface pressure of up to 250 t/m²
Standard
- (VDI 2700 sheet 14)
Operating temperature
- –40 °C to +120 °C
Load types Anti-Slip underlays
- Standard loads
-
Handling
Handling
1.Anti-slip mats must be designed such that the load and the underlying loading surface do not touch each other. It is not necessary to lay out the entire loading surface with anti-slip mats.
2.The friction coefficient attainable under practical conditions depends on the material pairing, the temperature, the condition of the material surfaces and the anti-slip mat.
3.The contact between the friction partners must be maintained in every driving situation.
4.In order to achieve the optimum slip inhibition, the contact areas (load and loading surface) must be dry, clean and free from ice and grease.
5.Intermediate layers must also be provided with anti-slip mats.
-
Downloads
Downloads
Description
Technical data
Coefficient of sliding friction
µ 0.6 at a surface pressure of up to 250 t/m²Standard
(VDI 2700 sheet 14)Operating temperature
–40 °C to +120 °CLoad types Anti-Slip underlays
Standard loadsHandling
1.Anti-slip mats must be designed such that the load and the underlying loading surface do not touch each other. It is not necessary to lay out the entire loading surface with anti-slip mats.
2.The friction coefficient attainable under practical conditions depends on the material pairing, the temperature, the condition of the material surfaces and the anti-slip mat.
3.The contact between the friction partners must be maintained in every driving situation.
4.In order to achieve the optimum slip inhibition, the contact areas (load and loading surface) must be dry, clean and free from ice and grease.
5.Intermediate layers must also be provided with anti-slip mats.
Downloads
Description
-
Technical data
Technical data
Coefficient of sliding friction
- µ 0.6 at a surface pressure of up to 250 t/m²
Standard
- (VDI 2700 sheet 14)
Operating temperature
- –40 °C to +120 °C
Load types Anti-Slip underlays
- Standard loads
-
Handling
Handling
1.Anti-slip mats must be designed such that the load and the underlying loading surface do not touch each other. It is not necessary to lay out the entire loading surface with anti-slip mats.
2.The friction coefficient attainable under practical conditions depends on the material pairing, the temperature, the condition of the material surfaces and the anti-slip mat.
3.The contact between the friction partners must be maintained in every driving situation.
4.In order to achieve the optimum slip inhibition, the contact areas (load and loading surface) must be dry, clean and free from ice and grease.
5.Intermediate layers must also be provided with anti-slip mats.
-
Downloads
Downloads
Description