de
en
Benefits
- Large selection of options as standard
- With end position switch-off as standard (at 24 V AC)
Technical data
Operating temperature
–20 °C to +40 °CPower supply
Without mains cableOverheating protection
Temperature monitor for lifting motorControl line
Length corresponds to the chain lengthImpact protector
Limit position switch-off for limiting the highest and lowest load positionOperating voltage
400 V, 3 ph, 50 HzInsulation class
FOverload protection
Friction couplingChain stores
includingProtection class
IP 55Lifting method
Main and fine strokeController
Contactor control 24V ACOptions
Options on request
Handling
1.No parallel shear pull – positioning of the device always centrally underneath the suspension gear
2.Hook tip must not be loaded
3.Lubricate the load chain prior to commissioning and at regular intervals
4.Load chain may not be used a chain sling
-
Benefits
Benefits
- Large selection of options as standard
- With end position switch-off as standard (at 24 V AC)
-
Technical data
Technical data
Operating temperature
- –20 °C to +40 °C
Power supply
- Without mains cable
Overheating protection
- Temperature monitor for lifting motor
Control line
- Length corresponds to the chain length
Impact protector
- Limit position switch-off for limiting the highest and lowest load position
Operating voltage
- 400 V, 3 ph, 50 Hz
Insulation class
- F
Overload protection
- Friction coupling
Chain stores
- including
Protection class
- IP 55
Lifting method
- Main and fine stroke
Controller
- Contactor control 24V AC
-
Options
Options
Options on request
- Radio remote control incl. travel limit switch
- in further lifting heights
-
Handling
Handling
1.No parallel shear pull – positioning of the device always centrally underneath the suspension gear
2.Hook tip must not be loaded
3.Lubricate the load chain prior to commissioning and at regular intervals
4.Load chain may not be used a chain sling
Benefits
- Large selection of options as standard
- With end position switch-off as standard (at 24 V AC)
Technical data
Operating temperature
–20 °C to +40 °CPower supply
Without mains cableOverheating protection
Temperature monitor for lifting motorControl line
Length corresponds to the chain lengthImpact protector
Limit position switch-off for limiting the highest and lowest load positionOperating voltage
400 V, 3 ph, 50 HzInsulation class
FOverload protection
Friction couplingChain stores
includingProtection class
IP 55Lifting method
Main and fine strokeController
Contactor control 24V ACOptions
Options on request
Handling
1.No parallel shear pull – positioning of the device always centrally underneath the suspension gear
2.Hook tip must not be loaded
3.Lubricate the load chain prior to commissioning and at regular intervals
4.Load chain may not be used a chain sling
-
Benefits
Benefits
- Large selection of options as standard
- With end position switch-off as standard (at 24 V AC)
-
Technical data
Technical data
Operating temperature
- –20 °C to +40 °C
Power supply
- Without mains cable
Overheating protection
- Temperature monitor for lifting motor
Control line
- Length corresponds to the chain length
Impact protector
- Limit position switch-off for limiting the highest and lowest load position
Operating voltage
- 400 V, 3 ph, 50 Hz
Insulation class
- F
Overload protection
- Friction coupling
Chain stores
- including
Protection class
- IP 55
Lifting method
- Main and fine stroke
Controller
- Contactor control 24V AC
-
Options
Options
Options on request
- Radio remote control incl. travel limit switch
- in further lifting heights
-
Handling
Handling
1.No parallel shear pull – positioning of the device always centrally underneath the suspension gear
2.Hook tip must not be loaded
3.Lubricate the load chain prior to commissioning and at regular intervals
4.Load chain may not be used a chain sling