Benefits
- Extremely safe – avoidance of incorrect loading through optimum alignment of the bolt-on swivel in the load direction – even when subjected to tensile load
- Additionally tested safety: DGUV-certified with H-stamp
Technical data
Standard
EN 1677-1Safety factor
4Operating temperature
Load angle
± 90°Quality grade
10Certification
H-stampAttachment
Screw-inRange of application Attachment devices
Attachment technologyRotation
360° (under load)Tilting
180°Identification mark
Batch numberType of attachment
multi-legDimensions
Options
Options on request
Option thread
Option Identification mark
Handling
1.Do not exceed the tightening torques specified in the product table (values specified are maximum values)!
2.For the installation it is sufficient to tighten the bolt-on swivel manually using a suitable tool (e.g. open-ended spanner conforming to DIN 895 or DIN 894).
3.Bolt-on swivel must be tightened so that it is fully contacting the support surface. Then check that the upper part rotates freely and easily.
4.Do not use an extension.
CAD
Planning
-
Benefits
Benefits
- Extremely safe – avoidance of incorrect loading through optimum alignment of the bolt-on swivel in the load direction – even when subjected to tensile load
- Additionally tested safety: DGUV-certified with H-stamp
-
Technical data
Technical data
Standard
- EN 1677-1
Safety factor
- 4
Operating temperature
- reduced carrying capacities outside this range
- –40 °C to +200 °C
Load angle
- ± 90°
Quality grade
- 10
Certification
- H-stamp
Attachment
- Screw-in
Range of application Attachment devices
- Attachment technology
Rotation
- 360° (under load)
Tilting
- 180°
Identification mark
- Batch number
Type of attachment
- multi-leg
-
Dimensions
Dimensions
-
Options
Options
Options on request
- in special designs
- in weldable design up to 17 t
Option thread
- with UNC thread and other thread types
- with internal thread up to 5 t
Option Identification mark
- with individual serial number or labelling
- with RFID chip
- A selection of the options available on request can be found below. Please contact us for your individual offer!
-
Handling
Handling
1.Do not exceed the tightening torques specified in the product table (values specified are maximum values)!
2.For the installation it is sufficient to tighten the bolt-on swivel manually using a suitable tool (e.g. open-ended spanner conforming to DIN 895 or DIN 894).
3.Bolt-on swivel must be tightened so that it is fully contacting the support surface. Then check that the upper part rotates freely and easily.
4.Do not use an extension.
-
CAD
CAD
Planning
Benefits
- Extremely safe – avoidance of incorrect loading through optimum alignment of the bolt-on swivel in the load direction – even when subjected to tensile load
- Additionally tested safety: DGUV-certified with H-stamp
Technical data
Standard
EN 1677-1Safety factor
4Operating temperature
Load angle
± 90°Quality grade
10Certification
H-stampAttachment
Screw-inRange of application Attachment devices
Attachment technologyRotation
360° (under load)Tilting
180°Identification mark
Batch numberType of attachment
multi-legDimensions
Options
Options on request
Option thread
Option Identification mark
Handling
1.Do not exceed the tightening torques specified in the product table (values specified are maximum values)!
2.For the installation it is sufficient to tighten the bolt-on swivel manually using a suitable tool (e.g. open-ended spanner conforming to DIN 895 or DIN 894).
3.Bolt-on swivel must be tightened so that it is fully contacting the support surface. Then check that the upper part rotates freely and easily.
4.Do not use an extension.
CAD
Planning
-
Benefits
Benefits
- Extremely safe – avoidance of incorrect loading through optimum alignment of the bolt-on swivel in the load direction – even when subjected to tensile load
- Additionally tested safety: DGUV-certified with H-stamp
-
Technical data
Technical data
Standard
- EN 1677-1
Safety factor
- 4
Operating temperature
- reduced carrying capacities outside this range
- –40 °C to +200 °C
Load angle
- ± 90°
Quality grade
- 10
Certification
- H-stamp
Attachment
- Screw-in
Range of application Attachment devices
- Attachment technology
Rotation
- 360° (under load)
Tilting
- 180°
Identification mark
- Batch number
Type of attachment
- multi-leg
-
Dimensions
Dimensions
-
Options
Options
Options on request
- in special designs
- in weldable design up to 17 t
Option thread
- with UNC thread and other thread types
- with internal thread up to 5 t
Option Identification mark
- with individual serial number or labelling
- with RFID chip
- A selection of the options available on request can be found below. Please contact us for your individual offer!
-
Handling
Handling
1.Do not exceed the tightening torques specified in the product table (values specified are maximum values)!
2.For the installation it is sufficient to tighten the bolt-on swivel manually using a suitable tool (e.g. open-ended spanner conforming to DIN 895 or DIN 894).
3.Bolt-on swivel must be tightened so that it is fully contacting the support surface. Then check that the upper part rotates freely and easily.
4.Do not use an extension.
-
CAD
CAD
Planning