de
en
Technical data
Attachment
weldableRotation
rigidRange of application Attachment devices
Attachment technologyOperating temperature
Quality grade
8Safety factor
4Standard
EN 1677-1Load angle
± 45°Type of attachment
1-legIdentification mark
Batch numberTilting
180°Dimensions
Options
Option Identification mark
with individual serial number or labellingSafety instructions
Handling
1.The load ring must be aligned to the pulling direction; it must be freely movable and may not rest on edges or on the attachment point.
2.Caution: Load ring 180° tiltable and loadable only from 0° to +/–45°!Safe alternative: Weldable hoist ring in quality grade 10 or weldable weld-on eye in quality grade 10, as they are loadable from 0° to +/–90° with the same carrying capacity
3.Welding work to be carried out only by a welder qualified according to EN ISO 9606-1 in compliance with applicable welding standards. Observe the operating instructions!
-
Dimensions
Dimensions
-
Safety instructions
Safety instructions
Technical data
Attachment
weldableRotation
rigidRange of application Attachment devices
Attachment technologyOperating temperature
Quality grade
8Safety factor
4Standard
EN 1677-1Load angle
± 45°Type of attachment
1-legIdentification mark
Batch numberTilting
180°Dimensions
Options
Option Identification mark
with individual serial number or labellingSafety instructions
Handling
1.The load ring must be aligned to the pulling direction; it must be freely movable and may not rest on edges or on the attachment point.
2.Caution: Load ring 180° tiltable and loadable only from 0° to +/–45°!Safe alternative: Weldable hoist ring in quality grade 10 or weldable weld-on eye in quality grade 10, as they are loadable from 0° to +/–90° with the same carrying capacity
3.Welding work to be carried out only by a welder qualified according to EN ISO 9606-1 in compliance with applicable welding standards. Observe the operating instructions!
-
Dimensions
Dimensions
-
Safety instructions
Safety instructions