Anti-slip mat Heavy load

This anti-slip mat has an extremely high load capacity of up to 1500 t/m² and is therefore particularly suitable for heavy-duty transport and heavy loads. The mesh is particularly sturdy and durable due to a 3 mm thick wear protection layer.

Coefficient of sliding friction: µ 0.7 for material combination wooden steel/loading surface
Coefficient of sliding friction: µ 0.9 for material combination wooden pallet/loading surface
Standard: (VDI 2700 sheet 14)
Surface pressure : 1500
Sturdy and durable

Configure

Configuration
Further information

Anti-slip mat Heavy load

Please login to see prices

Benefits

Particularly suitable for heavy and heaviest loads
Extremely high load capacity of up to 1500 t/m²
Durable and robust with 3 mm wear protection layer

Technical data

Surface pressure

1500 [t/m²]

Standard

(VDI 2700 sheet 14)

Coefficient of sliding friction

µ 0.9 for material combination wooden pallet/loading surface

µ 0.7 for material combination wooden steel/loading surface

Load types Anti-Slip underlays

Heavy loads

Handling

1.Intermediate layers must also be provided with anti-slip mats.

2.Anti-slip mats must be designed such that the load and the underlying loading surface do not touch each other. It is not necessary to lay out the entire loading surface with anti-slip mats.

3.The friction coefficient attainable under practical conditions depends on the material pairing, the temperature, the condition of the material surfaces and the anti-slip mat.

4.The contact between the friction partners must be maintained in every driving situation.

5.In order to achieve the optimum slip inhibition, the contact areas (load and loading surface) must be dry, clean and free from ice and grease.

Downloads

Description

Product brochure

FDI_PRODUCT_DOWNLOADS

Benefits
Benefits
- Particularly suitable for heavy and heaviest loads
- Extremely high load capacity of up to 1500 t/m²
- Durable and robust with 3 mm wear protection layer
Technical data
Technical data
Surface pressure
Standard
Coefficient of sliding friction
- µ 0.9 for material combination wooden pallet/loading surface
- µ 0.7 for material combination wooden steel/loading surface
Load types Anti-Slip underlays
Handling

Handling

1.Intermediate layers must also be provided with anti-slip mats.

2.Anti-slip mats must be designed such that the load and the underlying loading surface do not touch each other. It is not necessary to lay out the entire loading surface with anti-slip mats.

3.The friction coefficient attainable under practical conditions depends on the material pairing, the temperature, the condition of the material surfaces and the anti-slip mat.

4.The contact between the friction partners must be maintained in every driving situation.

5.In order to achieve the optimum slip inhibition, the contact areas (load and loading surface) must be dry, clean and free from ice and grease.
Downloads

Downloads

Description

Product brochure

FDI_PRODUCT_DOWNLOADS