de
en
Benefits
- With end position switch-off as standard (at 24 V AC)
- Large selection of options as standard
Technical data
Operating temperature
–20 °C to +40 °CPower supply
Without mains cableOverheating protection
Temperature monitor for lifting motorControl line
Length corresponds to the chain lengthImpact protector
Limit position switch-off for limiting the highest and lowest load positionOperating voltage
400 V, 3 ph, 50 HzInsulation class
FOverload protection
Friction couplingChain stores
includingProtection class
IP 55Lifting method
Main and fine strokeController
Contactor control 24V ACOptions
Options on request
Handling
1.Load chain may not be used a chain sling
2.No parallel shear pull – positioning of the device always centrally underneath the suspension gear
3.Hook tip must not be loaded
4.Lubricate the load chain prior to commissioning and at regular intervals
-
Benefits
Benefits
- With end position switch-off as standard (at 24 V AC)
- Large selection of options as standard
-
Technical data
Technical data
Operating temperature
- –20 °C to +40 °C
Power supply
- Without mains cable
Overheating protection
- Temperature monitor for lifting motor
Control line
- Length corresponds to the chain length
Impact protector
- Limit position switch-off for limiting the highest and lowest load position
Operating voltage
- 400 V, 3 ph, 50 Hz
Insulation class
- F
Overload protection
- Friction coupling
Chain stores
- including
Protection class
- IP 55
Lifting method
- Main and fine stroke
Controller
- Contactor control 24V AC
-
Options
Options
Options on request
- in further lifting heights
- Radio remote control incl. travel limit switch
-
Handling
Handling
1.Load chain may not be used a chain sling
2.No parallel shear pull – positioning of the device always centrally underneath the suspension gear
3.Hook tip must not be loaded
4.Lubricate the load chain prior to commissioning and at regular intervals
Benefits
- With end position switch-off as standard (at 24 V AC)
- Large selection of options as standard
Technical data
Operating temperature
–20 °C to +40 °CPower supply
Without mains cableOverheating protection
Temperature monitor for lifting motorControl line
Length corresponds to the chain lengthImpact protector
Limit position switch-off for limiting the highest and lowest load positionOperating voltage
400 V, 3 ph, 50 HzInsulation class
FOverload protection
Friction couplingChain stores
includingProtection class
IP 55Lifting method
Main and fine strokeController
Contactor control 24V ACOptions
Options on request
Handling
1.Load chain may not be used a chain sling
2.No parallel shear pull – positioning of the device always centrally underneath the suspension gear
3.Hook tip must not be loaded
4.Lubricate the load chain prior to commissioning and at regular intervals
-
Benefits
Benefits
- With end position switch-off as standard (at 24 V AC)
- Large selection of options as standard
-
Technical data
Technical data
Operating temperature
- –20 °C to +40 °C
Power supply
- Without mains cable
Overheating protection
- Temperature monitor for lifting motor
Control line
- Length corresponds to the chain length
Impact protector
- Limit position switch-off for limiting the highest and lowest load position
Operating voltage
- 400 V, 3 ph, 50 Hz
Insulation class
- F
Overload protection
- Friction coupling
Chain stores
- including
Protection class
- IP 55
Lifting method
- Main and fine stroke
Controller
- Contactor control 24V AC
-
Options
Options
Options on request
- in further lifting heights
- Radio remote control incl. travel limit switch
-
Handling
Handling
1.Load chain may not be used a chain sling
2.No parallel shear pull – positioning of the device always centrally underneath the suspension gear
3.Hook tip must not be loaded
4.Lubricate the load chain prior to commissioning and at regular intervals