de
en
Benefits
- With end position switch-off as standard (at 24 V AC)
- With fair price-performance ratio
- Large selection of options as standard
Technical data
Control line
Length corresponds to the chain lengthProtection class
IP 55Controller
Contactor control 24V ACOperating temperature
–20 °C to +40 °COverheating protection
Temperature monitor for lifting motorPower supply
Without mains cableOperating voltage
400 V, 3 ph, 50 HzImpact protector
Limit position switch-off for limiting the highest and lowest load positionLifting method
Main and fine strokeOverload protection
Friction couplingChain stores
includingInsulation class
FOptions
Options on request
Handling
1.Load chain may not be used a chain sling
2.No parallel shear pull – positioning of the device always centrally underneath the suspension gear
3.Hook tip must not be loaded
4.Lubricate the load chain prior to commissioning and at regular intervals
-
Benefits
Benefits
- With end position switch-off as standard (at 24 V AC)
- With fair price-performance ratio
- Large selection of options as standard
-
Technical data
Technical data
Control line
- Length corresponds to the chain length
Protection class
- IP 55
Controller
- Contactor control 24V AC
Operating temperature
- –20 °C to +40 °C
Overheating protection
- Temperature monitor for lifting motor
Power supply
- Without mains cable
Operating voltage
- 400 V, 3 ph, 50 Hz
Impact protector
- Limit position switch-off for limiting the highest and lowest load position
Lifting method
- Main and fine stroke
Overload protection
- Friction coupling
Chain stores
- including
Insulation class
- F
-
Options
Options
Options on request
- in further lifting heights
- Radio remote control incl. travel limit switch
-
Handling
Handling
1.Load chain may not be used a chain sling
2.No parallel shear pull – positioning of the device always centrally underneath the suspension gear
3.Hook tip must not be loaded
4.Lubricate the load chain prior to commissioning and at regular intervals
Benefits
- With end position switch-off as standard (at 24 V AC)
- With fair price-performance ratio
- Large selection of options as standard
Technical data
Control line
Length corresponds to the chain lengthProtection class
IP 55Controller
Contactor control 24V ACOperating temperature
–20 °C to +40 °COverheating protection
Temperature monitor for lifting motorPower supply
Without mains cableOperating voltage
400 V, 3 ph, 50 HzImpact protector
Limit position switch-off for limiting the highest and lowest load positionLifting method
Main and fine strokeOverload protection
Friction couplingChain stores
includingInsulation class
FOptions
Options on request
Handling
1.Load chain may not be used a chain sling
2.No parallel shear pull – positioning of the device always centrally underneath the suspension gear
3.Hook tip must not be loaded
4.Lubricate the load chain prior to commissioning and at regular intervals
-
Benefits
Benefits
- With end position switch-off as standard (at 24 V AC)
- With fair price-performance ratio
- Large selection of options as standard
-
Technical data
Technical data
Control line
- Length corresponds to the chain length
Protection class
- IP 55
Controller
- Contactor control 24V AC
Operating temperature
- –20 °C to +40 °C
Overheating protection
- Temperature monitor for lifting motor
Power supply
- Without mains cable
Operating voltage
- 400 V, 3 ph, 50 Hz
Impact protector
- Limit position switch-off for limiting the highest and lowest load position
Lifting method
- Main and fine stroke
Overload protection
- Friction coupling
Chain stores
- including
Insulation class
- F
-
Options
Options
Options on request
- in further lifting heights
- Radio remote control incl. travel limit switch
-
Handling
Handling
1.Load chain may not be used a chain sling
2.No parallel shear pull – positioning of the device always centrally underneath the suspension gear
3.Hook tip must not be loaded
4.Lubricate the load chain prior to commissioning and at regular intervals